Primary-engine driven hydraulic system (PTO and front-mounted depending on truck).
Utilizes hydraulic fluid meeting military specification for -40°F weather operation
Multiple section control valve bank for operation of booms and shut-off valves located outside of vehicle cab
4-inch, 600 GPM at 50 PSI centrifugal pump standard
Combination of steel, stainless, and high pressure rated EPDM wire reinforced rubber hose for -40°F operation
Cincinnati flusher system, consisting of four aluminum fan type nozzles with a 115° flat pattern. Nozzles adjustable for swath and angle. Flusher designed to adjust pattern from straight forward to a 35 degree angle either direction. System capable of 50gpm at 50 psi at all four nozzles at the same time
Single flusher nozzle located on each side near the middle of the unit to increase flushing coverage
Electric-rewind hose reel with 100 ft. of 3/4 inch hose and a spray wand
1450 U.S. Gallon Tank, Single compartment with two 10-gauge stainless, flanged baffles. Heads 10-gauge with dished and flanged weld area, tank thickness 10-gauge. All 304 stainless steel material.
20-inch manhole with 10-inch filler cap, low profile with quick release clamp
Sight-gauge located street side
Sills and Sub-frame of 8-gauge, 304 stainless steel. All backup, end caps, and reinforcement plates of 304 stainless.